Skip to content

Module's Selected Major Components

Module's Selected Major Components

The following sections are the selected major components necessary for .....

For each of the following sections, use one of the two styles given near the end. REMOVE THIS NOTE

Power Management

(remove this note/placeholder: this is where your 3.3 volt switching regulator, any other needed power regulator, and power source {if applicable} THAT WERE SELECTED)

For more details, review the "Appendix - Component Selection Process - Power Mangement" selection.

Sensor

(remove this note/placeholder: if applicable, this is where your SELECTED sensor is shown. Otherwise, remove this section.)

For more details, review the "Appendix - Component Selection Process - Sensor" selection.

Actuator

(remove this note/placeholder: if applicable, this is where your Selected the actuator items go, which includes both the driver and motor. Otherwise, remove this section.)

For more details, review the "Appendix - Component Selection Process - Actuator" selection.

Remove the following before submitting! Use them to present the selected components

Style 1

This is the example found in the assignment, uses more html

Table 1: Example component selection

External Clock Module

Component Pros Cons

XC1259TR-ND surface mount crystal
$1/each
link to product		 * Inexpensive[^1]
* Compatible with PSoC
* Meets surface mount constraint of project		 * Requires external components and support circuitry for interface
* Needs special PCB layout.

Rationale: A clock oscillator is easier ....

Style 2

Also acceptable, more markdown friendly

External Clock Module

  1. XC1259TR-ND surface mount crystal

    Pros Cons
    Inexpensive Requires external components and support circuitry for interface
    Compatible with PSoC Needs special PCB layout.
    Meets surface mount constraint of project

Rationale: A clock oscillator is easier ...